Firmware Upgrade for a Starnet Recorder using Starnet

1. Please go to Costarvideo.com to download the firmware or see link below
2. Extract the firmware
3. Open the Starnet Software and login
4. Click on System at the top right corner then Setup then Device
5. Right click on the recorder and select Firmware Upgrade
6. Select the .rui file that you downloaded and extracted in step 1 and click Open

The firmware upgrade process will start.  Please do not reboot the PC or recorder while the upgrade is in process.  After the upgrade process finishes on your PC please allow up to 7 minutes for the recorder to become fully operational. 

XDI Recorders

CR4020XDI- https://www.costarvideo.com/Product/starnet-recorders/cr4020xdi

CR8020XDI- https://www.costarvideo.com/Product/starnet-recorders/cr8020xdi

CR1620XDI- https://www.costarvideo.com/Product/starnet-recorders/cr1620xdi

CR3220XDI- https://www.costarvideo.com/Product/starnet-recorders/cr3220xdi

CR6420XDI- https://www.costarvideo.com/Product/starnet-recorders/cr6420xdi

ET Recorders

CR4010ET- https://www.costarvideo.com/Product/starnet-recorders/cr4010et

CR8015ET- https://www.costarvideo.com/Product/starnet-recorders/et-15-series

CR1615ET- https://www.costarvideo.com/Product/starnet-recorders/cr1615et